How to use THE ORIGINAL M1 BUDDY�
- Make sure your M1 or M1A is unloaded by retracting the oprod and inspecting the chamber.
- Secure the rifle in your favorite cradle or vice as you normally do for cleaning.
- Pull the oprod to the rear and insert THE ORIGINAL M1 BUDDY� into the top of the receiver, pushing and holding it all the way down with the open end facing forward and touching the front of the receiver/rear of the barrel.
- Allow the oprod and bolt to *slowly* slide forward until it contacts the rear of THE ORIGINAL M1 BUDDY�.
- The pressure applied by the bolt will hold THE ORIGINAL M1 BUDDY� in place until cleaning is complete.
- Once you are through, retract the oprod and remove THE ORIGINAL M1 BUDDY�.
No more M1 thumb! - Maybe the best feature of this product is the fact that The Original M1 Buddy eliminates all chances of contracting M1 thumb!Order yours today!, your thumb will thank you
